Bulldozer Parts,Excavator Parts,Supporting wheel,supporting wheel,guide wheel,retail and wholesale。

Contact US

Location: Home > News > Industry trends

What are the precautions for excavator mountain mining?

Release time: 2020-08-23 13:20:19 Source: Bulldozer

  Napoleon said: "Soldiers who don't want to be generals are not good soldiers." Then, since you have become an excavator driver, you must become a qualified and excellent operator. Mine operation skills are essential. Excavators work in the mines, with a very high risk factor, facing collapses and rolling rocks. For safety reasons such as landslides and other natural disasters, the pilots must understand the following risks in advance before entering the field to prevent potential safety hazards.


What are the precautions for excavator mountain mining?


  1:  Before performing operations, the site must be carefully observed. Mines are generally located in high mountains, with many steep slopes, which require relatively high driving skills. Some mine roads are relatively narrow and they are all dirt roads. Excavators are difficult to drive during the rainy season. Rainy days are also prone to natural disasters caused by mudslides.


  2: Excavators often work on the top of the mountain. The excavator mining team and the muck transportation team keep their energy out of the same line. The peeling operation of the mountain top excavator will inevitably cause rolling stones to fall, which eliminates potential safety hazards.


  3: The excavator digs hard rocks in the mine, which is very harmful to the bucket. Operators should operate the bucket correctly, adjust the position of the excavator according to the direction of the cracks in the rock, so that the bucket can be shoveled in smoothly, and the root of the tooth can be easily broken when digging.


  4: Excavator mining and stripping require at least two safety officers, whistle and walkie-talkie must be equipped, because the excavator operator cannot observe the rear slope and surrounding conditions at any time, and the safety officer needs to stand on a high place to observe carefully. Eliminate safety hazards.


  5: The excavator needs to repair the side slope incidentally when mining, and its main purpose is to reduce rolling rocks and mountain landslides.


  6: Excavator: You need to be attentive when working in the mountains, remember not to wear headphones to listen to songs, and always pay attention to the abnormal sound of the mountain or the commander’s whistle.


  7: Mountain mining often requires blasting operations, especially after blasting, pay special attention to safety. A full-scale inspection of the ore body in the operation area should be carried out in advance to see if there are loose or about to fall rocks, or caused by blasting Void joints, so as to prevent the excavator from entering the site and mining operations may cause rock rolling due to vibration.


  The above are the safety precautions for excavator mountain mining summarized by the veteran operator, which must be kept in mind, and the principle of safety first is the principle of excavator operation at all times.